From owner-pups@minnie.cs.adfa.edu.au Fri Dec 10 08:21:26 1999
Received: (from major@localhost)
	by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id IAA21942
	for pups-liszt; Fri, 10 Dec 1999 08:19:27 +1100 (EST)
Received: from toad.xkl.com (toad.xkl.com [192.94.202.40])
	by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with SMTP id IAA21938
	for <pups@minnie.cs.adfa.oz.au>; Fri, 10 Dec 1999 08:19:19 +1100 (EST)
Date: Thu, 9 Dec 1999 13:18:27 -0800
From: "Daniel A. Seagraves" <DSEAGRAV@toad.xkl.com>
Subject: Re: 2.11BSD boot looping
To: pups@minnie.cs.adfa.oz.au
Message-ID: <13506153760.17.DSEAGRAV@toad.xkl.com>
Sender: owner-pups@minnie.cs.adfa.edu.au
Precedence: bulk


[Snip instructions for installing a bootstrap]

No, I got the installation of the bootstrap just fine.  I was told that
the bootstrap for MSCP disks uses a bug in the UDA50 that some 3rd party
controllers don't exhibit.  (In my case, I have a Viking UDT SCSI controller)

I was saying I needed to know where/how to change the bootstrap (modify the
bootstrap, not use a different one) so that it will work.

I got a pointer at some 3BSD stuff on Minnie, but that code used a boot ROM on
the VAX 750 to get it's job done.

I don't have any MSCP books so I don't know where or how to change the
bootstrap to make it work on my machine.

-------

