From owner-pups@minnie.cs.adfa.edu.au Sun Nov 28 04:59:11 1999
Received: (from major@localhost)
	by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id EAA39100
	for pups-liszt; Sun, 28 Nov 1999 04:55:46 +1100 (EST)
Received: from toad.xkl.com (toad.xkl.com [192.94.202.40])
	by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with SMTP id EAA39096
	for <pups@minnie.cs.adfa.oz.au>; Sun, 28 Nov 1999 04:55:37 +1100 (EST)
Date: Sat, 27 Nov 1999 09:54:53 -0800
From: "Daniel A. Seagraves" <DSEAGRAV@toad.xkl.com>
Subject: 2.11BSD
To: pups@minnie.cs.adfa.oz.au
Message-ID: <13502970974.14.DSEAGRAV@toad.xkl.com>
Sender: owner-pups@minnie.cs.adfa.edu.au
Precedence: bulk

I am now dangerously close to getting 2.11BSD on my 11/44. ^_^
I got a SCSI disk controller (Viking UDT) and TS11 tapes, and 16 ports of
DZ11s  (Anyone got jumper/DIP switch info on these?), but my problem is
lack of a boot tape.

Anyway, since I have other machines around which can grok SCSI disks, I tried
making an RP06 image on Supnik's emulator, installing the rauboot instead of
hkuboot, but it failed.  The PDP-11 read the bootstrap in OK and the bootstrap
was running but it was looping (I forgot the address).

Has anyone done this before?  I would use a SCSI tape to boot from but the
SCSI tape drive I have died.  (Roached literally - one of the little fsckers
got inside it and got fried.)

-------

